Introduction
Husqvarna weed eaters are some of the most reliable and efficient gardening tools on the market, but on occasion, you may experience problems with the string getting stuck. This can be frustrating, especially when your weeds and overgrown grass will not stop growing. However, don’t panic! It’s a common and easily fixable problem, which we will cover in this guide.
Reasons Why Your Husqvarna Weed Eater String May Be Stuck
There are several reasons that can make the string stuck, some of which are:
Clogged String Head
Debris and grass that have accumulated in the string head can obstruct the free flow of the string. This can prevent the engine from revving sufficiently and cause the string to jam.
Inadequate String Length
If the string length is too short, it may get stuck within the spool. This problem is more likely to occur if the user is not careful when winding the string.
Twisted String
If the string has twisted while winding it onto the spool, it can cause the string to get stuck during operation.
Wrong String Size
Using the wrong size string can cause it to repeatedly get stuck. Make sure to always use the correct string recommended by the manufacturer.
Troubleshooting Steps
Here’s what you can do if you experience a stuck string:
Clean The String Head
The first step in troubleshooting a stuck string is to clean the string head and spool. Use a soft-bristled brush and water to clean the debris and grass clippings from the string head and spool.
Check The Length of The String
Ensure the string length is not too short. Release the tension and pull the string out to the desired length.
Reverse The String
If the string has twisted, tap the button at the bottom of the head to release the spool and remove the twisted string. Then, rewind the string and make sure it is wound straight onto the spool.
Replace With Right Sized String
Make sure to replace the string with the right size string. Check the user manual or the side of the weed eater for the correct size.
Consider A New String Head
If your weed eater is old and has been used over a long time, it might be necessary to replace the string head altogether. String heads are replaceable, and getting a new one can fix the problem of the string getting stuck.
Preventative Measures
It’s always better to prevent a problem than to fix it, and the same goes for a stuck string. Here are a few things you can do to prevent the string from getting stuck:
Winding The String Correctly
When putting in a new string, ensure that it is wound onto the spool correctly and without any twists. Follow the instructions from the user manual or video tutorials.
Keep The Head Clean
After using the weed eater, ensure you clean the head of any debris. You can use a soft-bristled brush to clean the head, especially after cutting through thick weeds and grass.
Use The Right Size String
Make sure you always use the right size string recommended by the manufacturer.
FAQs: Frequently Asked Questions
1. Why does my weed eater string wear out so fast?
When the string hits hard objects like stones and curbs, it can fray and wear out much faster. Ensure you cut at the right height and angle to prevent hitting hard objects with the string.
2. How often should I change my weed eater string?
How often you change the string depends on how frequently you use the weed eater. Generally, it is recommended that you change the string after every 10 hours of use. If you use the weed eater more frequently, you can consider changing it every 3-5 uses.
3. Why does my string keep breaking?
If the string keeps breaking, it can mean that there is an issue with the string tension, or the string is hitting hard objects like stones and curbs. Ensure that the tension is adjusted correctly and avoid twist ties and stones when cutting.
4. Can I use any string with my weed eater?
No, you should always use the specific string recommended by the manufacturer.
5. How can I remove a stuck weed eater string?
To remove a stuck weed eater string, tap the button at the bottom of the head to release the spool. Then, use pliers to grip the string and pull it out of the head.
Conclusion
A stuck weed eater string can be frustrating, but it is a common problem and can be fixed easily. Remember preventative measures like winding the string correctly and frequently cleaning the head, and you will significantly reduce the risk of the string getting stuck. If the problem persists, consider seeking professional help or replacing the head entirely.
